Das Boot #2

| Tuesday, March 31, 2009 | 4:28 PM

Take your time, hurry up. The choice is yours.

So it's been a month... I've spent much of my free time trying to accomplish other projects, but I've done a bit more work on the boat. I'm now slightly past the halfway mark of the first step. Yeah... Step 2 still scares me, but I've read through the book/instructions a bit farther, and I see there are other steps that are even more daunting (how do you drill a 1mm hole? much less 5 of them within a few mm of each other?). Anyway, here's where I'm at so far... this project continues to be awesome.

Add/Read Comments

2 comments.

← Previous Entry

Topher

| Tuesday, March 31, 2009 | 5:50 PM

I used to work at Rider's Hobby, and I know they have 1mm drill bits. Some even smaller. You can actually use just your finders to turn bits that small to make the holes, you don't need a tiny drill. :) I did some micro-wood-work when I worked there.

Ron

| Tuesday, March 31, 2009 | 7:27 PM

Topher: sure enough. I did a little more looking, and apparently they stop referring to those bits by "mm" and just give them numbers (e.g. #61 or #80). Well now I know... and have new tools to purchase.

...and I feel fine.
Menu Home About Me Archive Dictionary Pictures Latest Trivia Contact Me 2158 Comments RSS Search the Site Comments Captions New Comments Mark Ryan T Ron RFB Rob Friggin' Brandt Topher Slicy adam Morgan Gwen Brandt Google Ads	Das Boot #2 \| Tuesday, March 31, 2009 \| 4:28 PM Take your time, hurry up. The choice is yours. So it's been a month... I've spent much of my free time trying to accomplish other projects, but I've done a bit more work on the boat. I'm now slightly past the halfway mark of the first step. Yeah... Step 2 still scares me, but I've read through the book/instructions a bit farther, and I see there are other steps that are even more daunting (how do you drill a 1mm hole? much less 5 of them within a few mm of each other?). Anyway, here's where I'm at so far... this project continues to be awesome. Add/Read Comments 2 comments. ← Previous Entry Archive Next Entry → Topher \| Tuesday, March 31, 2009 \| 5:50 PM I used to work at Rider's Hobby, and I know they have 1mm drill bits. Some even smaller. You can actually use just your finders to turn bits that small to make the holes, you don't need a tiny drill. :) I did some micro-wood-work when I worked there. Ron \| Tuesday, March 31, 2009 \| 7:27 PM Topher: sure enough. I did a little more looking, and apparently they stop referring to those bits by "mm" and just give them numbers (e.g. #61 or #80). Well now I know... and have new tools to purchase. Submit a Comment Name: Site: Comment:
<@quito> Ron, you are worthwhile and valuable as a human being